| |
 |
| ::
Pipes & Pipe Fittings, Ducts, Vessels :: |
 |
| Product
Code |
Type |
Clarity, Colour |
Volatile % |
* Viscosity mPa.s |
* Gel Times Minutes |
Features |
Main Applications |
| PolyPol-1015
|
Orthophthalic |
Clear |
36-40 |
300-400 |
10-20 |
Pure medium reactive Resin |
Bigger diamerer Pipes, Pipe Fittings, Filament winding
application, Food application etc WRAS U.K. Lloyd’s
U.K., approved |
| PolyPol-1022
|
PET |
Clear, Yellowish |
38-42 |
400-600 |
12-18 |
Excellent chemical resistance |
Manufacturing pipe, vessels, containers, etc, for petroleum
products storage |
| PolyPol-1023
|
Isophthalic |
Clear, Yellowish |
38-42 |
400-600 |
8-20 |
High reactive, excellent Chemical Resistance Low Residual
Styrene |
Manufacturing of pipes, fittings, tanks, vessels, containers,
ducts by filament winding & centrifugal casting WRAS
U.K., approved, gel coat resin, Lloyd’s U.K., approved
|
| PolyPol-1023
HH |
Isophthalic |
Clear |
38-42 |
400-600 Yellowish |
10-15 |
Medium reactive, Good Chemical Resistance, Low Residual
Styrene |
Manufacturing of bigger diameter pipes, Fittings, tanks,
Vessels, Containers, ducts by filament winding & centrifugal
casting Laminating resin, Lloyd’s U.K. approved
|
| PolyPol-1023
FC |
Isophthalic |
Clear, Yellowish |
38-42 |
250-300 |
4-5 |
Excellent Chemical Resistance Higher productivity, suitable
for fast continuous filament winding Low Residual Styrene
|
Manufacturing of small and medium diameter pipes, fittings,
tanks, vessels, containers, ducts WRAS U.K., approved,
gel coat resin, Lloyd’s U.K., approved |
| PolyPol-1023
DH |
Isophthalic |
Clear, Yellowish |
38-42 |
700-900 |
20-25 |
Excellent Chemical Resistance Higher productivity, Suitable
for helical filament winding |
Manufacturing pipes, fitting, tanks, vessels, containers,
ducts etc by dual-helical filament winding process, WRAS
U.K., approved, gel coat resin, Lloyd’s U.K., approved
|
| PolyPol-1032
|
Terephthalic |
Clear, Yellowish |
38-42 |
300-400 |
8-15 |
Medium reactive, superior chemical resistance, low residual
styrene |
Manufacturing pipes, fitting, tanks, vessels, containers,
ducts etc Medium crosslink density, High HDT |
| PolyPol-1033
|
Terephthalic |
Clear, Yellowish |
38-42 |
400-600 |
10-20 |
High reactive, superior chemical resistance low residual
styrene |
Manufacturing pipes, fitting, tanks, vessels, containers,
ducts etc, High crosslink density, High HDT |
| PolyPol-1039
|
Bisphenol-A Fumarate |
Pale yellow slightly hazy |
48-52 |
500-600 |
15-25 |
Medium viscosity, Excellent chemical resistance, High
HDT |
For chemical process equipment Fuel tanks, ducts |
|
| |
 Storage |
 Unsaturated
polyester resin should be stored in closed containers, in
dark, away from sunlight and heat below 25 °C.
- CORROSION
RESISTANCE CHART WILL BE AVAILABLE ON REQUEST.
- CURING
CHARACTERISTICS AND VISCOSITY CAN BE ADJUSTED AS PER REQUIREMENT.
- THE
CATALYST AND ACCELERATOR QUANTITIES WILL BE AVAILABLE ON
REQUEST.
- WE
ALSO DEVELOP TAILOR-MADE RESINS AS PER CUSTOMER'S REQUIREMENT
UNDER STRICT CONFIDENCE.
- Detailed
Technical Data Sheet & Material Safety Data Sheet of
PolyPol resins and PolyGel gel coats available on request.
- Resins
and gel coats should be stored in dark, away from sunlight
and heat below 250C. Product stability and quality will
be reduced in case of exposure to high temperature and /
or light. Polychem will not honour claims for credit on
resins/ gel coats that are stored beyond its stated shelf
life or outside of recommended storage guide lines.
- This
version of product literature supersedes earlier published
product literature.
Disclaimer
This information contained in this brochure
is correct and accurate and is based on our laboratory and
field experience at the date of going to press. Such information
relates only to use of the products in the pure state and
for the purposes stated herein. Nothing stated here may be
taken or construed as implying a breach of any existing patents
or violate any law, safety code or insurance regulation. Nor
is any warranty, whether expressed or implicit, given with
regard to the results to be obtained through the use of the
aforesaid information. In the view of actual conditions of
usage storage, and handling being totally beyond our control,
the customer should evaluate the data and product and make
their own testss to determine the suitability our product
for their respective use in full scale production for their
own purpose and under his operating conditions. All our products
are sold without warranty, experssed or implied and no liability
or claim or subrogation rights against Polychem Resins International
Industries LLC can be accepted in respect of information and
use of products direclty or indirectly.
| Revision No : 3 |
January
2006 |
|
| |
|
|
