Polychem Resins International Industries LLC

:: Corrosion Resistant Special resins ::

Product Code	Type	Clarity, Colour	Volatile %	* Viscosity mPa.s	* Gel Times Minutes	Features	Main Applications
PolyPol-1041	Isophthalic	Clear	44-47	370-430	14-18	Excellent chemical and corrosion resistance to gasoline fuels, oils, alcohol blended fuels	Chemical and fuel storage tanks
PolyPol-1042	Isophthalic	Clear	44-47	370-430	14-18	High cross-linked version of Polypol-1041	Chemical and fuel storage tanks
PolyPol-1043	Terephthalic	Clear, Yellowish	38-42	300-400	8-15	Medium Reactive, superior chemical resistance, low residual styrene	Pipes, fittings, tanks, vessels, containers, ducts etc, medium cross-linking density, High HDT
PolyPol-1044	Terephthalic	Clear, Yellowish	38-42	400-600	10-20	High Reactive, superior chemical resistance, low residual styrene	Pipes, fittings, tanks, vessels, containers, ducts etc, medium cross-linking density, High HDT
PolyPol-1045	Terephthalic	Clear	44-47	370-430	14-18	Highly crosslinked, Excellent chemical resistance	Fuel storages tanks
PolyPol-1046	Bisphenol-A Fumarate	Pale yellow slightly hazy	48-52	500-600	15-25	Medium Viscosity, excellent chemical resistance, High HDT	Chemical process equipment fuel tanks, ducts
PolyPol-1047	PET	Clear	44-47	370-430	14-18	Medium Viscosity, excellent chemical resistance, High HDT	Fuel storages tanks
PolyPol-1071	Isophthalic	Cloudy	40-44	1500-2500	10-15	Excellent wetting and high mechanical properties	Cure In Place Pipe (CIPP) application
PolyPol-1072	Isophthalic	Cloudy	40-44	1500-2500	10-15	Excellent wetting and high mechanical properties and good shelf life	Cure In Place Pipe (CIPP) application
PolyPol-1073	Isophthalic/NPG	Cloudy	40-44	1500-2500	20-30	Excellent wetting and high mechanical properties	Cure In Place Pipe (CIPP) application

Storage

Unsaturated polyester resin should be stored in closed containers, in dark, away from sunlight and heat below 25 °C.

CORROSION RESISTANCE CHART WILL BE AVAILABLE ON REQUEST.
CURING CHARACTERISTICS AND VISCOSITY CAN BE ADJUSTED AS PER REQUIREMENT.
THE CATALYST AND ACCELERATOR QUANTITIES WILL BE AVAILABLE ON REQUEST.
WE ALSO DEVELOP TAILOR-MADE RESINS AS PER CUSTOMER'S REQUIREMENT UNDER STRICT CONFIDENCE.

Detailed Technical Data Sheet & Material Safety Data Sheet of PolyPol resins and PolyGel gel coats available on request.
Resins and gel coats should be stored in dark, away from sunlight and heat below 25⁰C. Product stability and quality will be reduced in case of exposure to high temperature and / or light. Polychem will not honour claims for credit on resins/ gel coats that are stored beyond its stated shelf life or outside of recommended storage guide lines.
This version of product literature supersedes earlier published product literature.

Disclaimer

This information contained in this brochure is correct and accurate and is based on our laboratory and field experience at the date of going to press. Such information relates only to use of the products in the pure state and for the purposes stated herein. Nothing stated here may be taken or construed as implying a breach of any existing patents or violate any law, safety code or insurance regulation. Nor is any warranty, whether expressed or implicit, given with regard to the results to be obtained through the use of the aforesaid information. In the view of actual conditions of usage storage, and handling being totally beyond our control, the customer should evaluate the data and product and make their own testss to determine the suitability our product for their respective use in full scale production for their own purpose and under his operating conditions. All our products are sold without warranty, experssed or implied and no liability or claim or subrogation rights against Polychem Resins International Industries LLC can be accepted in respect of information and use of products direclty or indirectly.

Revision No : 3

January 2006