| |
Storage |
Unsaturated
polyester resin should be stored in closed containers, in
dark, away from sunlight and heat below 25 °C.
- CORROSION
RESISTANCE CHART WILL BE AVAILABLE ON REQUEST.
- CURING
CHARACTERISTICS AND VISCOSITY CAN BE ADJUSTED AS PER REQUIREMENT.
- THE
CATALYST AND ACCELERATOR QUANTITIES WILL BE AVAILABLE ON
REQUEST.
- WE
ALSO DEVELOP TAILOR-MADE RESINS AS PER CUSTOMER'S REQUIREMENT
UNDER STRICT CONFIDENCE.
- Detailed
Technical Data Sheet & Material Safety Data Sheet of
PolyPol resins and PolyGel gel coats available on request.
- Resins
and gel coats should be stored in dark, away from sunlight
and heat below 250C. Product stability and quality
will be reduced in case of exposure to high temperature
and / or light. Polychem will not honour claims for credit
on resins/ gel coats that are stored beyond its stated shelf
life or outside of recommended storage guide lines.
- This
version of product literature supersedes earlier published
product literature.
Disclaimer
This information contained in this brochure
is correct and accurate and is based on our laboratory and
field experience at the date of going to press. Such information
relates only to use of the products in the pure state and
for the purposes stated herein. Nothing stated here may be
taken or construed as implying a breach of any existing patents
or violate any law, safety code or insurance regulation. Nor
is any warranty, whether expressed or implicit, given with
regard to the results to be obtained through the use of the
aforesaid information. In the view of actual conditions of
usage storage, and handling being totally beyond our control,
the customer should evaluate the data and product and make
their own testss to determine the suitability our product
for their respective use in full scale production for their
own purpose and under his operating conditions. All our products
are sold without warranty, experssed or implied and no liability
or claim or subrogation rights against Polychem Resins International
Industries LLC can be accepted in respect of information and
use of products direclty or indirectly.
| Revision No : 3 |
January
2006 |
|